Technical data - KAPPA 330 SH
| Wire length, processing on both sides min. | 1 mm |
| Wire length max. | 800000 mm |
| Strip lengths, full stripping side 1 max. | 180 mm |
| Strip lengths, full stripping side 2 max. | 50 mm |
| Strip lengths, partial stripping/multiple stripping max. | 999.9 mm |
| Wire outer diameter max. | 16 mm |
| Flat cable width max. | 40 mm |
| Wire cross section min. | 0.22 mm² |
| Wire cross section max. | 35 mm² |
| Wire draw-in speed max. | 4 m/s |
| Drive system | Double rollers or belt drive |
| Wire guide, side 1 | Swivel guide |
| Wire guide, side 2 | Fixed guide / split wire guide |
| Noise level | < 80 dB |
| Electrical connection | 115/230 VAC ± 10%, 50/60 Hz, 520 VA |
| Wire protection/ground | 2 x 5 × 20 mm 6.3 A |
| Nominal output (average) | 160 VA |
| Compressed-air connection | 5-8 bar |
| Compressed-air quality | oiled or unoiled, not alternating |
| Air consumption | 10 l/min |
| Operating pressure | 6 bar |
| Weight | 55 kg |
| Dimensions/length | 650 mm |
| Dimensions/width | 690 mm |
| Dimensions/height | 380 mm |
| Installation location | Level, stable and vibration-free support surface (e.g., Komax production table) |
| Size of production table (L x W) min | 630 x 690 mm |
| Load capacity of production table min. | 60 kg |
| Humidity, non-condensing | 90 % |
| Temperature operation | 10-40 °C |
| Processing outside the specifications | Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires. |
| Hard, tough wires | In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires. |
