Technical data - KAPPA 350

Wire length, processing on both sides min. 1 mm
Wire length max. 800000 mm
Strip lengths, full stripping side 1 max. 290 mm
Strip lengths, full stripping side 2 max. 150 mm
Strip lengths, partial stripping/multiple stripping max. 999.9 mm
Wire outer diameter max. 35 mm
Wire cross section min. 2.5 mm²
Wire cross section max. 120 mm²
Wire draw-in speed max. 4.8 m/s
Drive system Double rollers or belt drive
Wire guide, side 1 Swivel guide
Wire guide, side 2 Fixed guide
Noise level < 80 dB
Electrical connection 115/230 VAC ± 10%, 50/60 Hz, 650 VA
Wire protection/ground 16 A
Nominal output (average) 360 VA
Compressed-air connection 5-8 bar
Compressed-air quality oiled or unoiled, not alternating
Air consumption 20 l/min
Operating pressure 6 bar
Weight 275 kg
Dimensions/length 1090 mm
Dimensions/width 890 mm
Dimensions/height 1435 mm
Installation location Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min 630 x 690 mm
Load capacity of production table min. 75 kg
Humidity, non-condensing 90 %
Temperature operation 10-40 °C
Processing outside the specifications Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wires In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.


Brochure - KAPPA 350

Mød os på  stand G-5638