Technical data
| M1630 Jet Eco - Black | M1630 Jet Eco - Pigmented inks | |
| Ink type 1) | Dye ink and lightly pigmented inks | Highly pigmented inks |
| Ink cartridge contents | 825 ml | 555 ml |
| Make-up cartridge contents | 1200 ml | |
| Min./max. character height | 0.9 – 4.6 mm | |
| Min. wire diameter | 1.1 mm | |
| Max. printing speed 2) 3) | 5.7 m/s | |
| Grid (character matrix) 3) | 5×5, 5×5 (stacked), 7×5, 7×5 (stacked), 11×7 | |
| Position accuracy | Typically ±1 - 2 mm + 0.1 - 0.2 % of wire length | |
| Interface | Ethernet (TCP/IP) | |
| Compatible with | All Kappa 3xx, Gamma 450, Gamma 448 (please check the current status) |
|
| Connections | 1 × 110–240 V, 50/60 Hz, 40 W in idle mode, 80 W in operation No compressed-air connection required. |
|
| Ambient operating conditions 4) | +5 to +45 °C, rel. humidity 0 – 90%, non-condensing | |
| Housing material, protection class | Stainless steel, IP55 (splash-proof), electronics IP 66 | |
| Dimensions (W×H×D), installation |
Marker with 7" touch panel, 430 × 589 × 381 mm (16.9 × 23.2 × 15.0 in) Marker without touch panel, 430 × 411 × 381 mm (16.9 × 16.2 × 15.0 in) Space-saving setup of 2 markers on one trolley is possible. |
|
| Control panel | Color touch panel, optionally 7" or 10.4", can be used for several markers | |
| Head hose length | 3 m | |
| Weight (net) | 22 kg (48.5 lbs) | |
1) The inks suitable for the printer configurations are listed in the list of inks
2) Grid 5×5, font height 2.2 mm
3) Please note the temperature range of the inks, if necessary use cooling units
