Technical data - MIRA 440
| Strip lengths, full stripping max. | 40 mm |
| Strip lengths, partial stripping max. | 44 mm |
| Increment of strip length | 0.01 mm |
| Blade | Rotating flat blades |
| Wire outer diameter max. | 9 mm |
| Conductor diameter of coaxial cable min. | 0.15 mm |
| Conductor cross section (stripping) of single-conductor wire min. | 0.02 mm² |
| Conductor cross section (stripping) of single-conductor wire max. | 13 mm² |
| Conductor cross section (twisting) of single-conductor wire min. | 0.14 mm² |
| Conductor cross section (twisting) of single-conductor wire max. | 2.5 mm² |
| Conductor cross section (cutting) of single-conductor wire max. | 2 mm² |
| Incision diameter increment | 0.01 mm |
| Insertion depth max. | 26 mm |
| Gripping force | Programmable |
| Piece output max. | 650 pcs/h |
| Noise level | < 80 dB |
| Electrical connection | 100 - 240 V AC, 50/60 Hz, <130 VA |
| Weight | 14 kg |
| Dimensions/length | 141 mm |
| Dimensions/width | 473 mm |
| Dimensions/height | 290 mm |
| Temperature operation | 5 – 40 °C |
| Processing outside the specifications | Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires. |
| Cycle time | 5.6 sec |
| Data interface | USB interface for data backup, input for barcode scanner. |
| Input for barcode scanner | Data input mode: Configure the scanner to “HID Human Interface Device”. No driver needs to be installed. The readable code types depend on the barcode scanner model. |
| User interface | 5-color touchscreen, dial wheel |
| Trigger | Sensor, touchscreen, foot-operated switch (optional) |
