Technical data - ZETA 630
| Shortest wire length for one-sided processing | 85 mm |
| Shortest wire length for two-sided processing | 240 mm |
| Strip length side 2 max. | 25 mm |
| Strip length side 1 max. | 25 mm |
| Wire outer diameter max. | 6 mm |
| Wire cross section min. | 0.22 mm² |
| Wire cross section max. | 6 mm² |
| Wire draw-in speed max. | 10 m/s |
| Wire changer (in steps of 6 wires) | 36 Kabel |
| Sequence processing (number of wires) | 36 Kabel |
| Noise level (without crimp modules) max. | 80 dB |
| Electrical connection | 3 × 208 - 480 V 50/60 Hz, 3 kVA (base machine) |
| Compressed-air connection | 5 – 6 bar |
| Air consumption (without modules) | 7 m³/h |
| Network connection | Ethernet |
| Exhaust connection | Upon request |
| Compressed-air quality in accordance with DIN/ISO 8573-1 | Compressed air, dry, filtered (10 μm), oil-free |
| Weight (approx.) | 1700 kg |
| Length | 2365 mm |
| Width | 2005 mm |
| Height (with safety cover closed) | 1990 mm |
| Height (with safety cover open) | 2870 mm |
| Minimum clearance around equipment for maintenance work | 1500 mm |
| Floor conditions | Level, stable, clean and vibration-free bearing surfaces. Bearing surface for machine bearing points, made from a continuous base plate of concrete. No expansion joints between machine bearing points. Bearing surface is slip-proof. No plastic or asphalt coatings. |
| Hard, tough wires | In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, we will be happy to provide processing samples for your wires. |
